Panasonic CF-M32 Series - Manual (Page 73)

Setup Utility
Running the Setup Utility
To run the Setup Utility, you ^ Upon seeing
need to restart your computer. this message Press FI for Setup press
0
X note >
The Setup Utility will not be run if[Flj is not pressed soon after the com­
puter restarts. In this case, you need to restart your computer again.
If is displayed, enter your password.
If both the [User Password] and [Supervisor Password] have been set, after
entering the User Password, [Supervisor Setup] and [Load Default Setting...]
will not be displayed on the main screen.
To display the [Supervisor Setup] and [Load Default Setting...], enter the
Supervisor Password.
<Main Screen>
Setup Utility
•System Summary
•System Setup
•Power Management
•Supervisor Setup
Save Settings
Restore Settings-
Load Default Settings(PnP)
Load Default Settings(Non-PnP)
Exit Setup
C>*page 74
C^page 75
C^page 76
C5>page 78
Return to the state existing at the time of
Setup Utility startup, or to the settings
saved with [Save Setting.s],
Set default setting.s.
• (PnP) Plug & Play is set.
• (Non-PnP) Plug & Play is not set.
• When the Supervisor Password has been set,
input of the password is necessary.
73