Panasonic CF-M32 Series - Manual (Page 54)

DeaìtngWith Problems
During Operation
The computer
suddenly stops
operating.
• When operating the computer with a battery pack, the power
may become depleted. You must connect the AC adapter.
• The system may have locked up due to a problem in the appli­
cation software you are using. Stop using the application soft­
ware and reboot the computer by pressing the reset button.
The battery indi­
cator is red, or a
0% reading is dis­
played by press-
ing|Fnl+(ra).
• Battery is low. Connect the AC adapter to charge the battery.
• The AC adapter may not have been connected properly.
Make the proper connection.
® There is a possibility that the battery capacity measuring func­
tion is not functioning properly. Follow the steps listed under
"Accurately Displaying Battery Capacity" (C?page 34).
The battery indi­
cator blinks red.
• The battery may not have been connected properly. Make the
proper connection.
• If the problem persists, contact Panasonic Technical Support.
The battery indi­
cator blinks or­
ange.
• The battery pack temperature may be outside the 5°C to 35°C
(41°F to 95°F) range. Return the battery pack to a tempera­
ture at which it can be charged.
The beeper
sounded.
• The battery is nearly discharged. Connect the AC adapter to
charge or install a fully charged battery pack.
The battery indi­
cator not lit dur­
ing charging.
• The battery or AC adapter may not been connected properly.
Make the proper connections.
• It the problem persists, contact Panasonic Technical Support.
A 100% reading
is displ^ed by
pressing@}+@,
but the orange in­
dicator lights for
an extended pe­
riod of time
® Simply continue charging the battery pack until the indicator
turns green.
• There is a possibility that the battery capacity measuring func­
tion is not functioning properly. Follow the steps listed under
"Accurately Displaying Battery Capacity" (Q*page 34).
Operations are
slow.
• There may not be enough memory. Add a RAM module
(□’■page 48).
54