Reinstallatibn procedure – Panasonic CF-M32 Series User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reinstallatibn Procedure
— If the hard disk partitions have been changed since the computer was purchased
• To leave the current partition settings
Proceed to Procedure
1
on next page,
• To restore the partition settings to factory default
(1) Insert the FIRSTAID FD, which you made earlier, into the floppy disk drive.
Then turn the computer on.
(2) Select [2. Return hard disk partitions and hibernation data area to factory de
fault.)
(3) In response to the confirmation message, press ©
(4) When the message [Hibernation data area created.[ is displayed, confirm that
the FIRSTAID FD is in the floppy disk drive then press any key.
The computer will reboot. Then continue with step
2.
of Procedure
1
on next
page.
• To change the partition settings
(1) Insert the FIRSTAID FD, which you made earlier, into the floppy disk drive.
Then turn the computer on.
(2) Use the FDISK command to delete all partitions.
(3) Use the HBUTIL command to create the hibernation data area (CT page 71).
(4) Use the FDISK command to create MS-DOS partitions.
(5) Press ^it| + |ctrl]] + [Pel| to reboot the computer,
(6) Formal each of the MS-DOS partitions.
Next, proceed to Procedure
2
on next page.
(©styrausca)
Make sure to reinstall the Windows 95 operating system on the C: drive.
59