3 reset the system, Reset the system – Panasonic CF-M32 Series User Manual

Page 63

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3

Reset the system

<lnstail the files>

1. Click [Start], then click [Run]. Type "c:\panaapp\install.exe" under [Open],

then click [OKj.

2. When [Starting "Panasonic Reinstall Program".] is displayed, click [OK],
3. When ["Panasonic Reinstall Program" is finished.] is displayed, click [OK].

The computer will power off automatically.

4. Remove the CD-ROM drive.
5. Turn the computer on.

T

note

>

Various devices are recognized during the Windows 95 startup process. Follow
the steps below to install the drivers while paying close attention to the messages
that appear on the screen.

<Copy the windows 95 files>
1. When the computer prompts you to insert Windows 95 CD-ROM, click [OK],

2. Type "c:\cabs" under [Copy files from], then click ]OK].

<lnstall the YAMAHA sound card driver>

1. When [Unknown Device] is displayed, under [Update Device Driver Wizard]

window, click [Next].

2. When [Windows was unable to locate a driver for this device] is displayed,

click [Other Locations].

3. Type "c:\util\drivers\sound" under [Location], then click [OK].
4. Check whether [YAMAHA OPL3-SAx Sound System] has been found, then

click [Finish].

5. Click [OK] when the insert disk message is displayed.

6. Type "c:\util\drivers\sound" under [Copy files from], then click [OK].

63

Advertising