Panasonic CF-M32 Series - Manual (Page 60)

Reinstalling Software
Format the C drive
1. Insert the FIRSTAID FD which you made earlier in the floppy disk drive,
then turn the computer on.
The following screen will be displayed.
Main Menu I
1. Restart in MS-DOS mode. '
2. Return hard disk partitions and the hibernation data area to
factory default.
3. Format C drive.
Enter a choice:
2. Select (3. Format C drive.]
3. At the confirmation message, press ( Y |.
After the formatting process is completed, press any key. The computer will
power off automatically.
2.
Install Windows 95
1. Attach the CD-ROM drive. Turn on the CD-ROM drive.
Insert the Windows 95 CD-ROM Setup Boot Disk which you made earlier in
the floppy disk drive, then turn the computer on.
When the message [Press FI for Setup] is displayed, press ^ F1 ) to run the
Setup Utility.
Select [Load DefaultSettings (Non-PnP)], then press ^Ent^. At the confirma­
tion message, press [Enter j.
Save the settings then close the Setup Utility.
The computer will reboot.
When the message [Press any key to continue...] is displayed, press any key.
When the message [Perform reinstallation?] is displayed, press 0
When the computer prompts you to insert FIRSTAID CD , please set the speci­
fied CD in the CD-ROM drive and press any key.
When the computer prompts you to insert Windows 95 CD-ROM, please set
the specified in the CD-ROM drive and press any key.
10. When the message [To continue, press ENTER....] is displayed, press [Ente r|.
After Microsoft ScanDisk completes, the computer will automatically return
to the Windows 95 setup.
Simply follow the on-screen instructions.
2 .
3.
4.
5.
6 .
7.
8
.
9.
60