Panasonic CF-M32 Series - Manual (Page 38)

Security Measures
When you do not want your Supervisor Setup
changed without permission
Set the Supervisor Password.
After it has been set, no changes can be made to the Supervisor settings unless the
password is entered.
I When the supervisor password is set
in the setup utility (o-page 78),
if^is displayed,
Input the correct supervisor password and press
fEnterl.
Supervisor Setup
May be
Opened
Supervisor Setup
Can not be
Opened
When the supervisor password is incorrect or
when the user password is entered, (Or, even when
the correct supervisor password is entered ¡^page
(There are cases in which ihe Supervisor Setup
does not appear on the main screen), (^page 73
X
note
>
I
You may You may wish to protect the User Password (cépage 39).
Setting the supervisor password
(enabling, changing, disabling)
7 Run the Setup Utility (
q
> page 73)
2 Using Q and 0 , select [Supervisor Setup] then press
[Enter]
3
Using Q and Q , select [Supervisor Password], then
press (Enter]
^ # To enable or change your supervisor password
1. Enter your password at the [Enter Supervisor Password], then press [T].
2. Re-enter your password at the [Enter Supervisor Password Again].
(This is for confirmation purposes.)
3. Using
0
and [ Î ] , select [Set Supervisor Password] then press [Enter].
38