Panasonic KX-P3124 - Manual (Page 23)

o o.
This printer has two paper feed mechanisms to support 4 paper paths. One mechanism is TRACTOR
mode for continuously fed paper. In the tractor mode you can choose between PUSH or PULL.
The other paper feed mechanism is FRICTION mode. In the friction mode you can feed single sheets
or envelopes through the front or top. The optional KX-PT11 Cut Sheet Feeder will accommodate
automatic feeding of single sheets, from the top paper path.
Push Tractor mode (Q PUSH)
—fanfold paper (1 part)
—multipart forms consisting of 2 parts
Pull Tractor mode (0 PULL)
—multipart forms consisting of 3
or 4 parts
—labels
—fanfold paper {1 part)
Friction mode (Q)
—single sheets
(The KX-PT11 Cut Sheet Feeder
allows you to automatically feed up
to 80 sheets of 20 lb paper.)
—envelopes
Front
feeding
Front
feeding
C/>
o
Note:
•For optimum print quality, do not use reverse line feeding in pull mode. If reverse feeding is
necessary in pull mode, set REV LF/PULL in the INSTALL menu to ON through the
Function mode.
•Paper Parking is not available in pull mode.
• Multipart forms consisting of 2 parts, may be used for rear feeding (PUSH mode). For 3 or
4 part forms, we recommend bottom feeding {PULL mode) for optimum print quality.
•When printing on envelopes or thick sheets, front feeding is recommended.
23