Note, O turn the power switch on – Panasonic KX-P3124 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If ON LINE indicator is not lit, press
(ON LINE) to get ready to print.
Note:
•If the paper does not automatically load, press (5D (LOAD/PARK).
•When the paper feed selector is in the “0” position, the buzzer will sound to inform you that
the selector is in the wrong position.
•When loading an envelope, if the envelope will not load smoothly, move the paper feed
selector to the “0 PULL” position and insert the envelope manually, then move the selector
back to the “Q” position.
•When printing on envelopes or thick sheets, front feeding is recommended.
0)
(D
C
■O
Single Sheets and Envelopes: Friction Mode—Front Feed
1
A Ц
. . .
1
H <
- - 2
E
A '
. . .
0
a '
g
...4
- - 5
▼
1
...0
+
Printhead gap
lever
0
OFF
^0
POWER
ON
O
Turn the power switch on.
A beep will sound and the PAPER OUT indica
tor will flash. This indicates that there is no
paper installed in the printer.
0 Adjust the printhead gap lever for
the thickness of paper you are
using.
Position
Used for
1 or 2
Thinner sheets
3, 4, 5 and 6
Thick sheets or Envelopes
35