Panasonic KX-P3124 - Manual (Page 64)

ISlDDiXSiMjD (Möxa§
Note;
•When changing the left/right margins, / (3 moves the carriage right or left.
Pressing (5 ]! (3 when the carriage reaches the end of the platen moves it to the opposite
end.
• If the left margin is set to the right of the right margin, the right margin is reset to 80 {10 cpi)
automatically.
•The skip perforation command overrides the front panel bottom margin setting.
•When the PRINT WIDTH is changed, the left margin will default to 0" and the right margin will
default to 8" or 9" automatically depending on your selection of the print width. Please refer to
chart on page 97 for the maximum number of characters per line according to your pitch
selection. To change the print width to either 8" or 9", refer to “PRINT MODE Menu” (in this
page).
PRINT MODE Menu
(To Change Print Direction etc.)
This printer allows you to select print direction in graphics and text modes.
When you print graphics such as tables, set the G.DIRECTION Sub-menu to UNI. The printer will
print left-to-right only and provide precise vertical alignment. Setting to Bl will print in both directions
and reduces printing time, however the vertical alignment may not be as precise.
c
3
o
5’
3
o
a
(D
PRINT WIDTH
This Sub-menu in the PRINT MODE Main menu will allow you to change the print width to either 8"
or 9".
PANEL LOCK
This Sub-menu in the PRINT MODE Main menu will allow you to decide the priority between the
printer’s front, panel settings and the software commands. This PANEL LOCK Sub-menu is set to
OFF when shipped which allows the software commands to override the printer’s front panel settings.
To activate the printer’s
Font only—Set PANEL LOCK=FONT
Pitch only—Set PANEL LOCK=PITCH
Font and Pitch only—Set PANEL LOCK=F&P
All settings—Set PANEL LOCK=ALL
Note:
•When you set a SC font in the FONT Sub-menu and “FONT” in the PANEL LOCK Sub-menu,
PITCH will be changed to “PROPORTION” (Proportional Spacing) automatically.
64