Note, Insert the back-up disk into either drive a or b, For dos – Panasonic KX-P3124 User Manual
Page 90: For windows, Type a: (or b:) and press [enter, Select run from the file menu, Type cmdref, Type a:\cmdref (or b:\cmdref), Press [enter, Click |ok| (or press [enter])
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0
o io
The Command Reference program allows you to access a detailed explanation of each software
command or the proportional spacing tables on your computer screen. Each displayed explanation
can be printed out if required.
Before you use the Setup Disk, it is recommended that you make a back-up copy and store the
original in a safe place.
Note:
• Use the DISK COPY command of the operating system to make a back-up copy. Refer to your
DOS manual for further information.
•You may find it convenient to install the Setup Disk programs directly onto your C Drive, rather
than reading them from the Setup Disk each time a change is necessary. Either method is
acceptable.
To perform an automatic installation of the Setup Disk files onto your C Drive, refer to page 70.
1
Insert the back-up disk into either drive A or B.
<For DOS>
<For WINDOWS>
Type A: (or B:) and
Press [Enter],
Select Run from the File menu.
Type CMDREF
Type A:\CMDREF (or B:\CMDREF)
Press [Enter].
Screen 1 will be displayed.
Screen 1
^ Click |OK| (or Press [Enter]).
Screen 1 will be displayed.
< < Panasonic KX-P3124 command reference utility (xxxxxxxxxxx) > >
- - SELECT EMULATION - -
LEPSpNj
IBM
t t l M i ]
[Enter]
IE]
Select emulation
Set emulation
Exit to DOS
90