Panasonic KX-P3124 - Manual (Page 99)

Paper which may be used with this unit must be within the specifications provided below.
Fanfold Paper
Width: 4 to 10 inches (102 to 254 mm)
Quality and number of sheets:
Type of paper Sheets
Weight
lbs g/m^
push pull push pull
Fine-quality paper 1 16 to 22 16 to 24 60 to 83 60 to 90
Non-carbon 2 to 4 11 to 14 (17*) 41 to 53 (64*)
Multi-layered with carbon 2 11 to 14 (17*) 41 to 53 (64*)
^only for the last sheet
Note:
•When using multi-part fanfold paper, especially in environments which have very high or low
temperature and/or humidity, we recommend the use of the bottom feed pull mode to optimize
paper handling and print quality.
•To insure optimum print quality, 16 to 22 lbs (60 to 83 g/m^) is recommended for graphic
printing.
• In multi-layered paper with carbon, the carbon is equivalent to a sheet of paper.
•“Weight in pounds" represents the weight of 500 [17x22 inches (432x559 mm)] sheets.
•The printer will handle multipart papers up to 0.013 inch (0.32 mm) thick. Up to 4 copies of
14 lb. chemical release paper can be used.
• Multipart forms consisting of 2 parts may be used for rear feeding (Push mode). For 3 or 4 part
forms, we recommend bottom feeding for optimum print quality.
Single Sheet
Width: 4 to 11.7 inches (102 to 297 mm)
Height: 5 to 14.3 inches (127 to 363 mm)
Weight in pounds (g/m^): 14 to 24 (53 to 90 g/m^)
Envelope
#6 and #10 size envelopes are recommended. Since envelopes vary in size, paper weight and
construction, we cannot guarantee print quality and paper handling for all types of envelopes.
Note;
•To optimize print quality printing should not occur in areas where the edges overlap.
99