Connections for rgb equipment (bnc input) – Panasonic DT2750MS User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. Turn off the power switches of the video equipment and/or your monitor if they are now on.
2- Connect the BNC cables for RGB and the RCA cables for audio to the video equipment and the monitor as
shown in the following figures.
Note: These cables are not supplied with the monitor.
3
.
If it has not been installed, first connect one end of the power cable to the monitor and then the other end to
the AC outlet*.
4
.
Set the BNC»HD D-sub switch to the “BNC” position.
5
.
Turn on the power switches of the monitor and the RGB equipment.
6.
Select “RGB1” by pressing front button RGB
1
or pressing the RGB
1
key on the remote control unit (see page
21
) .
Caution: *lf the AC outlet is of the two prong type, please consult with a licensed electrician.
Connections for RGB equipment (BNC input)
13