Panasonic DT2750MS User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Item
Mode
How to adjust
Horizontal Position
CD
Mode 2
1.
Press MENU button a few times to select Mode 2.
2.
Press + or - button a few times to select “H. POSI” control.
3.
Press SET button.
4.
Press + or - button a few times to move the image horizontally.
move the image right,
move the image left.
5.
Press SET button to store the correction in the memory.
Side Pincushion
□
Mode 2
The side-pincushion distortion level {shape of image sides) can be set.
1.
Press MENU button a few times to select Mode 2.
2.
Press + or - button a few times to select “SIDE PIN” control.
3.
Press SET button.
4.
Press + or - button a few times to move the image sides.
move the image outward (concave),
move the image inward (convex).
5.
Press SET button to store the correction in the memory.
Trapezoid
Q
Mode 2
1.
Press MENU button a few times to select Mode 2.
2.
Press + or - button a few times to select “TRAPEZOID” control.
3.
Press SET button.
4.
Press + or - button a few times to adjust the trapezoidal distortion level (top
or bottom image width).
make the top of the image wider,
make the bottom of the image wider.
5.
Press SET button to store the correction in the memory.
Parallelogram
Mode 2
1.
Press MENU button a few times to select Mode 2.
2.
Press + or - button a few times to select “PARALLEL” control.
3.
Press SET button.
4.
Press + or - button a few times to adjust the parallelogram.
shift the top of the image to the left,
shift the top of the image to the right.
5.
Press SET button to store the correction in the memory.
Corner
Side-Pincushion
n
Mode 2
Corner side-pincushion control can be adjusted the top and bottom corner
shape.
1.
Press MENU button a few times to select Mode 2.
2.
Press + or - button a few times to select “SPIN COR” control.
3.
Press SET button.
4.
Press + or - button a few times to move the image sides.
“H-”: move the image outward (concave).
move the image inward (convex).
5.
Press SET button to store the correction in the memory.
Side-Pincushion
Balance
a
Mode 2
Side-pincushion balance control can be adjusted the shape of the vertical
bow.
1.
Press MENU button a few times to select Mode 2.
2.
Press + or - button a few times to select “SPIN BAL” control.
3.
Press SET button.
4. Press + or - button a few times to adjust the balance.
“+”: move the left image outward (concave), the right image inward (convex),
move the right image outward (concave), the left image inward (convex).
5. Press SET button to store the correction in the memory.
30