Rear panel, Connections for external speakers – Panasonic DT2750MS User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections for external speakers
7.
Turn off the power switches of the external
speakers and/or your monitor if they are now on.
2.
Connect the speaker cables to the external
speakers and the monitor as shown in the following
figures.
3.
Set the speaker select switch to the right marked
“EXT".
4.
If it has not been installed, first connect one end of
the power cable to the monitor and then the other
end to the AC outlet*.
5.
Turn on the power switch of the monitor.
6.
Select the input signal.
7.
This completes the installation of your monitor.
Caution: *lf the AC outlet is of the two prong type,
please consult with a licensed
electrician.
Rear panel
19