Nn computer — monitor connection, Rs-232c, Data interval < computer – Panasonic DT2750MS User Manual
Page 34: Rs-232c communication
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RS-232C communication
The DT-2750MS has an RS-232C connector on the rear panel. Users can control brightness, contrast, horizontal
centering, vertical centering, horizontal size, vertical size, color, tint, sharpness, volume, mute, input select,
degauss, color temperature, side-pincushion, trapezoid, power ON/OFF, memory recall, rotation, parallel, side-pin
corner, side-pin balance, white balance (user) and OSD control with a computer by connecting an RS-232C cable.
nn Computer — Monitor connection
RS-232C
® @ ® (2) ■
® C S ) ® © // D-sub9pin
Input connector
Protocol
/ Speed
Non-parity
Data
\ Stop bit
8 bit
1 bit
2400 bps, 9600 bps, 14400bps, 28800 bps Select \
+10 V(“0”)
-10 V (“1”)
Data interval
< Computer >
1. Continuous up/down command
110 ± 20 ms
2. Before another (new) command
—> Min. 300 ms
< Monitor >
Max. 20 ms
Max. 20 ms
33