Rear panel, Rgb1 in connectors, Connections for component video equipment – Panasonic DT2750MS User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections for component video equipment
1.
Turn off the power switches of the video equipment
and/or your monitor if they are now on.
2.
Connect the BNC cables for
YP
b
P
r
and the RCA
cables for audio to the video equipment and the
monitor as shown in the following figures.
Note; These cables are not supplied with the
monitor.
3.
If it has not been installed, first connect one end of
the power cable to the monitor and then the other
end to the AC outlet*.
4,
Turn on the power switches of the monitor and the
video equipment.
5.
Select “DTV” by pressing front button
DTV
or
pressing the
DTV
key on the remote control unit
(see page 21).
Caution:
*lf the AC outlet is of the two prong type,
please consult with a licensed
electrician.
Rear panel
RGB1 IN connectors
4
AC outlet
18