Picture and audio quality controls, General operation – Panasonic DT2750MS User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Picture and audio quality controls
When the monitor is turned on and the “on screen control” menu disappears, picture and audio quality controls
are invalid.
To adjust the picture and audio control functions, the MENU button must be pressed first.
User controls are separated into 2 groups. One is the luminance, chrominance, and audio control group (Menu
mode 1). The other is the geometric control group {Menu mode 2).
General operation
1.
Press MENU button. Then “Menu mode 1” is shown on the CRT screen as follows:
Selected control function is displayed.
In Menu mode 1, audio volume, brightness, contrast, color, tint, sharpness, white balance R/G/B output level,
color temperature selection, memory recall, degauss and audio mute can be controlled.
Press MENU button again. Then “Menu mode 2” is shown on the CRT screen as follows:
In Menu mode 2, vertical size/position, horizontal size/position, side pincushion, trapezoid, parallelogram, corner
side-pincushion, side-pincushion balance, raster rotation, H. moire, input signal status display, monitor ID code
selection, RS-232C speed selection, clamp pulse width selection, and aspect ratio selection can be controlled.
Press MENU button again, then "Menu mode 2” disappears.
To select the control which you want to adjust, select Menu mode 1 or Menu mode 2 by pressing MENU button
first.
24