Brookfield YR-1 Rheometer - Manual (Page 56)

Brookfield Engineering Labs., Inc. Page 56 Manual No. M02-215-B0412
APPENDIX G- DVE-50 Probe Clip
Probe Clip DVE-50 is supplied when the optional DVP-94Y RTD Temperature Probe is ordered for use
with the YR-1 Rheometer. It is used to attach the RTD temperature probe to a low form Griffin beaker.
Figure G-1 is a view of the Probe Clip, showing the hole into which the RTD probe is inserted. When
inserting the RTD probe into the Probe Clip, the upper part of the Clip is compressed by squeezing
the points shown in Figure G-1.
RTD Probe
Hole
Squeeze Here when
Installing RTD
Temperature Probe
Figure G-1
Figure G-2 shows the probe clip mounted in a 600 mL low form Griffin beaker.
Note: The RTD probe must be parallel to the beaker wall so as not to interfere with the
yield measurement.
Brookfield 600 mL Low Form
Griffin Beaker
DVE–50
Probe Clip
RTD Temperature Probe
Figure G-2