ChemoMetec NC-3000 User Manual
Page 26
991-3003 Rev. 1.0
August 2013
26
Pan and zoom settings are preserved from the previously selected file. The extended results for the
selected file will be shown in the result tab page. Furthermore, the protocol, media type, sample ID,
operator and volumes will be shown for the selected file.
Right-click options: Right-click on a file to get a context menu offering the following options:
o
Show Data: Opens the selected file in Plot Manager with the saved plots defined by the
user: However, if no plots have been saved, then plots defined by the protocol will be
displayed. This option is only available for images acquired with NucleoView NC-3000™
software version 2.0.0.0 or newer.
o
Show Raw Data: Opens the selected file in Plot Manager with the plots defined by the
protocol. This option is only available for images acquired with NucleoView NC-3000™
software version 2.0.0.0 or newer.
o
Show Embedded Image Analysis Results: Displays the original results of the image file. This
option is only available for images acquired with NucleoView NC-3000™ software versions
prior to version 2.0.0.0.
o
Reanalyze Image File with Selected Protocol: Reanalyzes the image file with the protocol
selected in the acquisition mode and displays the results of this analysis. Be aware that the
selected protocol is chosen in acquisition mode (when the Run button is displayed).
Afterwards when a file is selected in the browse file list the protocol name that the file was
acquired with is displayed (when the Return button is displayed), but the selected protocol
will still be the protocol chosen in acquisition mode.
o
Add to Report: Adds the file to the
o
Print: Prints the embedded data for the file.
o
Print with Plots: Prints the embedded data for the file together with the plots saved for the
file.
o
Approve: Option to approve the data for the file in connection with 21 CFR Part 11. See the
o
Start Protocol Adaptation Wizard: Starts the
that the file has been acquired with.
o
Properties: Opens the