ChemoMetec NC-3000 - Manual (Page 43)

991-3003 Rev. 1.0 August 2013 43
Large Scatter Plot in Plot Manager
The large scatter plot is used to set axis parameters, add or edit polygons and quadrants and define gating
settings.
1. Axis Settings: By clicking on either the y-axis or x-axis it is possible to select type of axis scale, image
channel, parameter type and axis limits.
 Type of axis: Linear, Log or Bi-exponential. For Bi-exponential it is possible to edit the below
zero scale value.
 Image channel: Names of the available channels.
 Parameter types: The available parameters depends on the protocol used to generate the *.cm
file.
The scatter plot below shows an example where the maximum x-axis limit has been set lower than
the measured maximum.
Note how cells outside the plot area are plotted in the margins, visualizing that the current x-axis
max limit setting causes cells to fall outside the plot area.