Options – ChemoMetec NC-3000 User Manual
Page 49
991-3003 Rev. 1.0
August 2013
49
Options
The options dialog has the following tab pages:
Folders: The location of the result file folder can be set by the user and the new folder selection can be
applied for all users. Please note that changing the result folder location to a network location is not
recommended, as this may cause slow reading of the relatively large image files depending on the
speed of the network. It may also cause problems with saving new images during image acquisition, if
access to the network location is limited.
A copy of the results without the image can be saved as a csv file for every completed run of a
protocol. The location for the folder, where to save the csv files, can be set by the user and the new
folder selection can be applied for all users.
Authorization: The 21 CFR Part 11 mode can be enabled or disabled if this license has been purchased.
User rights to approve results can be set. User login options can also be enable under this tab and do
not require activation of 21 CFR part 11 mode. See the