ChemoMetec NC-3000 - Manual (Page 40)

991-3003 Rev. 1.0 August 2013 40
Large Histogram Plot in Plot Manager
The large histogram plot is used to set axis parameters, edit marker sets, define gating settings and add
overlay histograms.
1. Axis Settings: By clicking on the x-axis it is possible to select type of axis, image channel, parameter
type and axis limits. By clicking on the y-axis it is possible to select between count and percent, and
by clicking on ‘Max’ the axis max limit can be set.
 Type of axis: Linear, Log or Bi-exponential. For Bi-exponential it is possible to edit the below
zero scale value.
 Image channel: Names of the available channels.
 Parameter types: The available parameters depends on the protocol used to generate the *.cm
file.
2. Gating Setup: Launches the Gate Configuration window, where gating settings can be configured
for this plot.
3. New Marker: Creates a new marker.
4. Selected Gate: Edit the selected marker.
 Move with Arrow Keys
 Move Left End with Arrow Keys
 Move Right End with Arrow Keys
 Copy to Clipboard
 Delete
5. BMP to Clipboard: Copies the large plot to the clipboard to paste the bitmap image into a preferred
program.