Compex Wireless - Manual (Page 13)

User Manual
EN
12
SELECT AN OBJECTIVE OR A PROGRAMME
The steps for selecting an objective or a programme are similar.
SELECT AN OBJECTIVE SELECT A PROGRAMME
Select an item
Validate your selection
Back to
main menu
Select an item
Validate your selection
Back to
main menu
Press for Info
menu
Stick the electrodes on your skin. Electrodes are
attached from the side. Slide the module along
the electrode snap until you hear a click.
Please note: Markings tell you which way to
insert: the On/Off button on the main pod and a
little vertical line on the shellthe other pod.
WHEN AN OBJECTIVE IS SELECTED YOU CAN SEE THE DETAILS OF ALL THE
SESSIONS IT COMPRISES.
Select an item
Validate your selection
Back to the
previous screen
See the electrode placement
and body position associated
with your objective and
selected task. For programmes,
you will be able to view all the
possible electrode placements.
For objectives, you will see
what placement to use. To
scroll through the illustrations,
use the up/down button on the
multi-directional pad.
You can now place the
electrodes on your body and
connect the modules to them.
Press for Info menu
1
2
* 1. Body position
2. Electrode placement
*
4.2 CONNECT THE MODULES TO THE ELECTRODES
To disconnect the module from the electrode,
just do the reverse.
Validate your selection
Select (or not) the warm-up or cool-down phase
Back to previous screen
WARM-UP AND COOL-DOWN
This screen is not available for all programmes.
You can choose to do the warm-up phase before starting the session and the cool-down phase at the end of the stimulation session.
Please note: Compex recommends that you keep the warm-up phase, unless you have already done a voluntary warmup, and the cool-down
phase.
4.3 PREPARING FOR YOUR SESSION
Please note: For voluntary sessions (cycling in this example), you have to
validate the session yourself by pressing the button under the icon