COP-USA CM260IR-IP - Manual (Page 31)

Page 27 2 Mega Pixel IP Camera User Manual
Please refer to the following table for parameters and instructions of FTP configuration.
5.6
Advanced Configuration
Advanced configuration includes four submenus: User Configuration, Security Configuration,
Configure Backup & Restore, Reboot and Upgrade.
5.6.1
User Configuration
Go to “User Configuration” interface.
Add user:
1. Clicking “Add” button pops up “Add user” dialog box.
User Configuration Add User
Note: After binding physical address to the IP-CAM, you can access the device on this PC in
network only. If the MAC address was “00:00:00:00:00:00” which means it can be connected
to any computers.
2. Input user name in “User Name” textbox (only letters).
3. Input characters in “Password” and “Confirm Password” textbox (letters or numbers).
4. Input the MAC address of the PC in “Binding MAC address” textbox.
5. Click “OK” button and then the new added user will display in the user list.
Modify user:
1. Select the user which needs to modify password and physical address in the user
configuration list box.
Parameter Meaning
Server name The name of the FTP server
Server address The address of the FTP server
Port The port number of the FTP server
User name The user name of the FTP server
Password The password of the FTP server
Path The save path for FTP files