COP-USA CM260IR-IP - Manual (Page 32)

Page 28 2 Mega Pixel IP Camera User Manual
2. Clicking “Modify” button will pop up “Modify user” dialog box as shown below.
Modify User
3. Input original password of this user in the “Password” text box.
4. Input new password in the “New password” and “Confirmation” text box.
5. Input computer’s physical address which is used to access the server in the “User PC MAC”
text box.
6. Click “OK” button to modify password and binding MAC address successfully.
Delete user:
1. Select the user which needs to delete in the user configuration list box.
2. Clicking “Delete” button will pop up a confirm dialog box. Then click “OK” to delete the
user.
Note: The default super administrator cannot be deleted.
5.6.2
Security Configuration
1. Go to Advanced Configuration Æ Security Configuration to see a tab shown below.
2. Check “Enable IP address” check box, select “Deny the following IP address”, input IP
address in the IP address list box and click “Add” button. Then this IP address will display in
the list box; the operation step of “Allow the following IP address” is the same with “Deny
the following IP address”.
3. Select the IP address which needs to be deleted from the IP address list box and click
“Delete” button to delete that IP address.
4. Check “Enable MAC address” check box, select “Deny the following IP address”, input
MAC address in the MAC address list box and click “Add” button. Then this MAC address
Parameter Meaning
User Name User name to operate the logon client end
User Type Type of users, normal user, advanced user and super administrator
Binding MAC address
The MAC addresses of user access the server which should set up
according to actual MAC address of server.
Password Password to log in the client terminal
Confirm Password Password to log in the client terminal