COP-USA WS08 - Manual (Page 11)

Network Video Server/IP Camera User Manual
11
Interface description:
1.『A,B』alarm output interface, switching output, opened in normal and closed in alarm linkage.
『 S,G』alarm input interface, normal open or normal close probe can be connected,【S,G】is a
group of alarm input.
2.『ANT』antenna interface (WIFI/3G antenna)
3.『LAN』RJ45 socket of standard network
4.『USB』USB interface, not supported
5.『RESET』reset button, it is used to restore factory default parameters of device, including IP
address and user password.
6.『LINE IN』audio input, connecting to active device.
7.『LINE OUT』audio output, connecting active device or passive device
8.『RUN』system run indicator lamp, flashing indicating normal running of system
9.『PWR』is power supply indicator lamp.
10.『DC12V』connect to 12V DC through voltage stabilizer, please use matching voltage stabilizer
power supply.
11.『SD CARD』SD card interface, high speed SD card can be inserted, support up to 32G.
12.『SIM』socket of SIM card, 3G mobile internet card, so as to realize the transmission of audio
and video data etc through 3G network from network camera.
5) Definition for the interface of infrared waterproof, fixed hemisphere, spherical network
camera panel: