COP-USA WS08 - Manual (Page 54)

Network Video Server/IP Camera User Manual
54
『System Restart』,『System Restore Settings』, etc.
Please see the figure as below:
System Setting
『Server Time Setup』The system offers the function of calibration to the time of
client end for remote DVS/IP Camera ; When it confirms the time
of client end is correct, click “Set”, then video server will work
by the time of client end.
『Update FLASH』 Click “Save” to save the revised parameters into the “flash” in
the server; Otherwise, the system will still use the previous
parameters after restart.
『Server Upgrade』When DVS/IP Camera needs upgrade, click this button to
upgrade as the steps below:
Step I: Click『Browse』button
Step II: Select the upgrade files (details as the figure below)
Step III: Click『Upgrade』
Notice: