COP-USA WS08 - Manual (Page 32)

Network Video Server/IP Camera User Manual
32
characters. Date and time will be displayed at left upper corner of the screen; description of
channel will be displayed at the scope of 0～image resolution broad band on X-axial and 0～
image resolution height on Y-axial.
『 Occlusion Setting』 Set occlusion at designated area, with the steps as below:
Step I: Select『Channel』(There is only one channel that can not be selected for DVS/IP
Camera);
Step II: Use your mouse to click『Occlusion Setting』, a setting window will pop-up as below;
Step III: Use left key of mouse to drag and draw any area you want to occlude;
Step IV: Click『Apply』to set occlusion block on the image under monitoring.
If you want to delete the occlusion settings, just use the left key of mouse to click “Occlusion Area
Setting”, a setting window will pop-up; then click 『Delete』, and finally click『Apply』, so the
occlusion will be deleted.
4.4. Network setting
Profile:
This module is used to basic network setting of DVS/IP Camera e.g. IP address, subnet mask,
default gateway, data port, Web port, address of DNS server, as well as the mode to acquire IP
address; when the network parameters are modified, DVS/IP Camera will restart automatically.
Notice:
During setting IP address, please avoid the contradiction between its IP address with that of
other equipment in LAN; when the network parameters are modified, DVS/IP Camera will
restart automatically.