COP-USA WS08 - Manual (Page 14)

Network Video Server/IP Camera User Manual
14
and Dial-up connections” menu, click the “Local Area Connection” icon of the network card
connecting to video server, right click and select “Property”, select “Internet Protocol (TCP/IP)” in
pop up “General” page, click “Property” to pup up the page as shown below:
set up network parameters of computer
Select “Use the following IP address”, and fill in IP address 192.168.1.99 (or other IP address
in the same network segment not conflicting with 192.168.1.100), the subnet mask is
255.255.255.0; the default gateway address is 192.168.1.1. No other setting is required; click the
“OK” of this page and the “OK” of the “Local Area Connection Properties”. Wait the system to
complete the configuration.
If you are using Windows Vista /Window 7 operating system
3. After entering the operating system, click【Start】→【Control Panel】, open “Network and
Sharing Center” → select “Management and Network Connection”, click the “Local Area
Connection” icon of the network card connecting to DVS/IP Camera, right click and select
“Property”, select “Internet Protocol version 4 (TCP/IPv4)” in pop up “Local Area Connection
Property” page, click “Property” to pup up the page as shown below: