COP-USA WS08 - Manual (Page 41)

Network Video Server/IP Camera User Manual
41
manually control “On” and “Off” of the warning output relay. The detailed setting is as below.
Warning Output Setting
Probe output warning setting:
『Output I』Select the type according to the connected warning output equipment
『Output II』Select the type according to the connected warning output equipment
『Name of Switch』May customize the name of switch, or select as default
『Setting』After change the parameters, click this button to save the parameters setting
4.10. PPPOE&DDNS Settings
Profile: According to the customer’s demands, if the fore-end accesses to network by dial-up,
users need to conduct the setting to PPPOE; while if the remote users need to access to DVS/IP
Camera via domain name, they can select DDNS supported by DVS/IP Camera to make settings.
Currently it can support three kinds of DDNS:
www.dyndns.com ；www.netnvr.com;
(where www.netnvr.com is the private DDNS of our company)