COP-USA WS08 - Manual (Page 53)

Network Video Server/IP Camera User Manual
53
UPNP Setting
『Enable UPNP』UPNP is not enabled in factory default of camera, tick『Enable UPNP』to
enable UPNP function;
『Work Mode』there are 2 options of work mode: Auto Port Mapping and Manual Port Mapping;
when Auto Port Mapping is set, DVS/IP Camera will assign mapping port automatically; when
Manual Port Mapping is set, it is required to manually set “Remote Data Port”, “Remote Web
Port” and “Remote Mobile Port”;
『Net Adapter Type』select to use “wired adapter” or “wireless adapter” to realize UPNP
function;
『Local Port Setting』It is the local access port of DVS/IP Camera, it is required to set local port
in network parameters;
『Remote Port Setting』It is the port through which DVS/IP Camera is accessed remotely; After
remote port mapping is set, when you can use remote port to access DVS/IP Camera, the router
will carry out data transition between remote port and local port.
4.19. System Setup
Profile
“System Setup” chiefly include the common settings for all parts e.g.『System
Clock』,『System Parameters Saving』,『System Update』,『System Version』,