COP-USA WS08 - Manual (Page 52)

Network Video Server/IP Camera User Manual
52
4.17.3. Mobile access setting
Set mobile access port, the default value is 15961. For the purpose of mobile access, it is required
to install mobile monitoring software of attached CD on mobile.
Mobile setting
4.18. UPNP setting
General
After UPNP function is enabled, and then by combining DDNS, you can let your DVS/IP Camera
to realize plug and play.
“UPNP setting” mainly includes『Enable UPNP』,『Work Mode』,『Network Card Type』,
『Local Port Setting』and『Remote Port Setting』etc setting.
As shown in below: