COP-USA WS08 - Manual (Page 50)

Network Video Server/IP Camera User Manual
50
Step IV: Set『Device NO.』, means the serial number of platform server (for our product, it does
not need to input the serial number)
Step V: Click『save』, save the parameters
4.17. WIFI Setting
Profile
Here you can set the parameters of 3G network card, WIFI and cell port.
4.17.1. 3G parameters setting
In NVClient client side, open “Remote Setting” to pop up “Parameters Setting” dialog box,
select “Wireless Setting” option, select “Enable” in “3G Parameters” field at the right side,
select 3G card type (only EVDO of domestic telecommunication is supported at present).
3G parameters setting
After setting, close DVS/IP Camera and insert 3G network card, then start the server, it will take
about 1 minute to dial up for the first time. It can be used after the dialing is successful; if 3G
dialing is successful, then 3G states will display “UP”, IP address will display the IP address