COP-USA WS08 - Manual (Page 37)

Network Video Server/IP Camera User Manual
37
Notice:
Must connect it with external dome camera that supports preset position;
furthermore, set the preset position in main interface which can be used
Step VIII: Tick and select『Linkage Alarm Output』(Optional)
Users may connect with external alarm equipment e.g. alarm ring, alarm light,
alarm signal, etc. In case an emergency triggers the probe, the system may
automatically output binary to the external equipment
『 Probe Type』 When the “Normally Open” alarm probe is connected, please select “Normally
Open”, When the “Normally Close” alarm probe is connected, please select “Normally Close”.
4.7. Video Motion Warning
After the video Motion warning is started, when the image moves in set area set time period, the
DVS/IP Camera will conduct warning treatment by set actions e.g. snap-shot jpg pictures in
linkage, conduct probe output in linkage, as well as send the alarm to client end, so that the client
may proceed to treatment basing on local settings. Video motion warning information includes
name of server, IP, alarm type, time, etc. that may be saved into log files for the purpose of
convenient inquiry afterwards. In case the client end has no connection with DVS/IP Camera
when the warning occurs, users may set it to trigger the client end to login the server automatically
and open the image when the warning occurs.
Set video motion warning