COP-USA WS08 - Manual (Page 3)

Safety notice
This content is designed to ensure that user can use this product correctly, so as to avoid risk or
property loss. Please read this operation manual carefully before using this product, and keep the
manual properly for future reference.
Precautions are divided into 2 parts: “Warning” and “Notice” as shown below:
Warning: serious injury may be resulted when the warning item is ignored.
Notice: property loss may be resulted when the notice item is ignored.
Warning:
1. Please use the power supply with safety low voltage requirement and conforming to rated 12V
DC supply of limited power source.
2. If the device can not work normally, please contact the place where the device is bought or the
nearest service center, never dismantle or modify this device in any method (problem resulted
from unauthorized modification or repair will be the user’s responsibility to solve).
3. In order to reduce the risk of fire or electric shock, this product is not subjected to rain or
moisture.
4. The installation should be carried out by professional service staffs, and conforming to the
stipulations of local regulations.
Notice:
1. Before running camera, please check that the power supply is correct.
2. Never subject this product to dropping or intensive knocking.
3. Please never directly touch the optical elements of image sensor; if it is necessary to clean, use
clean soft cloth wetted by high concentration alcohol to wipe off dirt gently; please use dust
cap when the camera is not used.
4. Never place the product in damp, dusty, extremely hot, extremely cold (normal working
temperature: -10°C~70°C) and strong electromagnetic radiation etc locations.
5. Never allow water and other fluid flow into DVS/IP Camera.
6. When DVS/IP Camera is delivered, use the original package or equivalent grade of material
to pack.