Cub Cadet Z-Force S Series User Manual
Page 31
Advertising
Body
25
8.
Remove the screws that hold the front of the control
console to the front of the seat box assembly using a
T-30 torx driver and a 7/16” wrench. See Figure 4.21.
9.
Lift the control console off of the mower.
10.
Install the control console by following the previous
steps in reverse order.
11.
Test drive the mower in a safe area before returning it
to service.
Figure 4.21
7/16”wrench
T-30 torx
Advertising