Cub Cadet Z-Force S Series - Manual (Page 70)

Z-Force-S
64
17. Install the wear block and spring. See Figure 6.59.
NOTE: The groove in the wear block faces the bot-
tom of the gearbox housing.
18. Press in the upper ball bearing into the upper hous-
ing. See Figure 6.60.
19. Press the lower ball bearing into the upper housing.
See Figure 6.61.
Figure 6.59
Wear block
Figure 6.60
Press in the upper
ball bearing
Figure 6.61
A socket can
be used to press
in the ball bearing