Cub Cadet Yanmar 3TNV72 - Manual (Page 54)

GENERAL SERVICE INFORMATION
TNV IDI Service Manual 4-19
Specifications
Engine General Specifications
Note: The information described in Principal Engine Specifications is for a “standard” engine. To obtain the
information for the engine installed in your driven machine, please refer to the manual provided by the
driven machine manufacturer. Engine rating conditions are as follows (SAE J1349, ISO 3046/1):
• Atmospheric Condition: Room temperature 77°F (25°C), Atmospheric pressure 29.53 in Hg (100 kPa,
750 mm Hg), Relative humidity 30%
• Fuel Temperature at Fuel Injector Pump Inlet: 104°F (40°C)
• With Cooling Fan, Air Cleaner, Muffler: Yanmar Standard
• After Engine Break-In Period; Output Allowable Deviation: ± 3%
• 1 PS = 0.7355 kW
• 1 hp SAE (Society of Automotive Engineers) = 0.7457 kW
Type Vertical In-line, Water Cooled, 4-Cycle Diesel Engine
Combustion System Swirl Chamber (Ball Type)
Starting System Electric Starting
Cooling System Radiator
Lubricating System Forced Lubrication with Trochoid Pump
PTO Position Flywheel End
Direction of Rotation Counterclockwise Viewed from Flywheel End
TNV_IDI_ServiceManual_(3TNV72 for YN only).book 19 ページ ２００７年１１月２９日 木曜日 午後２時５８分