Track eq, Filter, Track eq -23 filter -23 – Elektron Machinedrum User Manual

Page 31

Advertising
background image

THE TRACK EFFECTS

23

TRACK EQ

Using the 1-band parametric EQ, you can boost or reduce a certain frequency band.

EQF controls which center frequency that will be affected by the EQ gain.

EQG controls the EQ gain. If set to a negative value, the volume of the frequency centered
around the EQF parameter will be reduced.

If you find a bass drum lacking in punch, try adding a little EQ-gain in the lower
frequencies.

FILTER

The TRACK EFFECT system offers a resonant 24dB lo/hi/band-pass filter. The parameters
are untraditional, giving the user control of both the low and high filter cutoffs, as well as a
variable gap bandpass filter.

FLTF controls the base filter cutoff frequency. When the FLTW parameter is set to its high-
est value, changing the FLTF parameter has the function of a high-pass filter. When the
FLTF parameter is set to zero, the highpass-Q is disabled.

The illustration below shows the function of the filter.

FLTW controls the filter gap width, that is the distance between the highpass and lowpass
cutoff frequencies. When the FLTF is set to its minimum value, changing the FLTW param-

Advertising