Elektron Machinedrum - Manual (Page 83)

GLOBAL SETTINGS
75
• You can send every stored sample to make a complete sample dump. Scroll down
in the NAME/SIZE window until you find the option that says ALL.
• You can also transmit samples stored in the RAM machines. Doing this you can
sample sounds from the Machinedrum UW and store them externally.
• When sending a sample to a computer the position of the sample in the sample
list will be stored in the syx-file. When the same sample is sent to the UW using
the ORG method of receival it will then be stored in its original position. Note that
this only affects syx files.
RENAME SAMPLES
In OS 1.62 or higher you can give each ROM sample an individual name. Up to four char-
acters can be used.
1. Select FILE in the GLOBAL EDIT menu. Then select SAMPLE MGR and press [ENTER/
YES].
2. Select RNAME by using the [UP] and [DOWN] arrows. Confirm the selection by press-
ing the [ENTER/YES] button.
3. Choose which sample you want to rename by using the [UP] and [DOWN] arrows and
then press [ENTER/YES]. A window will appear where you can enter a name for the
ROM sample.
4. Use the SOUND SELECTION wheel or the [UP] and [DOWN] keys to cycle through the
letters. The [LEFT] and [RIGHT] keys move the cursor backwards and forwards on the
line.
• Pressing the [FUNCTION] key gives access to the “high score” selection method,
in which you see all characters at the same time. Keep the [FUNCTION] key held
while navigating using the [LEFT], [RIGHT], [UP] and [DOWN] buttons. Release the
[FUNCTION] key when you have found the right letter.
ERASE SAMPLES
Every sample loaded into the UW can also be erased. Erasing samples frees up sample
memory.
1. Select FILE in the GLOBAL EDIT menu. Then select SAMPLE MGR and press [ENTER/
YES].