Elektron Machinedrum User Manual
Page 50
THE PATTERN SEQUENCER
42
2.
When you are in the track you wish to clear, press and hold [FUNCTION]. Then press
[PLAY] to clear the track. The message “CLEAR TRACK” will appear.
•
The clear track operation can be undone by performing the clear track operation
one more time. The message “UNDO TRACK” will be shown in the display.
TRACK PAGE COPY
In GRID RECORDING mode you can also copy one page of trig data and paste it to
another page.
1.
Make sure you are in GRID RECORDING mode, indicated by the <RECORD> LED giv-
ing off a steady light. Select the source track using the SOUND SELECTION wheel.
2.
Go to the page you want to copy by pressing the [SCALE SETUP] key.
3.
Hold the [SCALE SETUP] key and press [RECORD]. A message saying “COPY PAGE”
page will appear.
4.
Go to the pattern page you want to paste the copied page into by pressing the [SCALE
SETUP] key. Paste the data by holding [SCALE SETUP] while pressing the [STOP] key.
A message saying “PASTE PAGE” will be shown in the display
•
Pasting a track page overwrites any previous notes, data and parameter locks.
•
The track page paste operation can be undone by holding down the [SCALE
SETUP] key while pressing the [STOP] key. A message saying “UNDO PAGE” will
be shown in the display.
CLEAR TRACK PAGE
It is also possible to clear a track page.
1.
Make sure you are in GRID RECORDING mode.