Elektron Machinedrum - Manual (Page 80)

GLOBAL SETTINGS
72
want to perform the action or not. Press [ENTER/YES] if you want to proceed with the
copy operation.
3. A prompt will ask if you want to "RELOAD SAMPLES NOW?".
4. If you press the [ENTER/YES] button the content of all other RAM machines will be
erased. If you want to copy the other RAM machines as well it is very important that you
instead press the [EXIT/NO] key.
5. When you have copied all the RAM machines you can either press the [ENTER/YES]
key when being asked if you want to reload the samples, or exit the SAMPLE MAN-
AGER. In either way, all the RAM machines will be emptied.
GENERAL SAMPLE RECEIVE
You don’t have to be in SAMPLE MGR menu to receive samples. This is possible to do at
any time and in any menu. This method of receiving samples functions exactly the same
way as the ORG option described in “ORIGINAL PLACE SAMPLE RECEIVE” on page 74.
1. Connect the MIDI cables correctly to the Machinedrum UW. The MIDI OUT port on the
MIDI interface should be connected to the MIDI IN port on the Machinedrum UW. If you
want to use the closed loop transfer method, connect the MIDI OUT of the UW to the
MIDI IN of the MIDI interface.
2. Load the samples you want to send to the Machinedrum into a suitable program, for
example C6.
3. Send the samples. A message will appear saying “RECEIVING SAMPLE”. The bar
below the text shows the progress of each sent sample. Playback of the sequencer will
be halted.
4. When the Machinedrum senses that no more samples are sent a new message may
appear stating “CLEANING”. When the cleaning is done the message “LOADING” will
appear and the samples are transferred to the DSP system.