Elektron Machinedrum - Manual (Page 48)

THE PATTERN SEQUENCER
40
2. You can now lay down your beat in real time by triggering the machines in your kit with
the [TRIG] keys.
3. To stop recording, press [STOP]. To exit recording but keep the sequencer playing the
pattern, press [PLAY].
4. To remove notes recorded, hold [EXIT/NO] and a [TRIG] key. All notes will be removed
for the part of the track that is played while the [EXIT/NO] and [TRIG] keys are held.
5.
• All live recorded data will be quantised to the current scale resolution (16th or
32nd notes).
NOTE COPY
It is possible to copy a note trig, complete with all parameter lock settings, and paste it to a
new location in the track.
1. Make sure you are in GRID RECORDING mode, indicated by the <RECORD> LED giv-
ing off a steady light.
2. Press and hold the note trig you want to copy and press the [RECORD] key. A window
saying “COPY NOTE” will appear.
3. Hold the [TRIG] key correspondning to the location you want to paste the note to and
press the [STOP] key to complete the paste operation. A window showing “PASTE
NOTE” will be shown.
CLEAR NOTE PARAMETER LOCKS
Instead of removing the parameter locks from a note you can also use the clear note locks
command.
1. Make sure you are in GRID RECORDING mode. The <RECORD> LED should be lit.
2. Hold and press the [TRIG] key you whose content you want to clear. Then press [PLAY]
to clear the note. The message “CLEAR NOTE LOCKS” will appear.