Elektron Machinedrum - Manual (Page 84)

GLOBAL SETTINGS
76
2. Select ERASE by using the [UP] and [DOWN] arrows. Confirm the selection by pressing
the [ENTER/YES] button.
3. Choose which sample you want to erase by using the [UP] and [DOWN] arrows and
then press [ENTER/YES]. You will be prompted to confirm the removal of the sample.
Press the [ENTER/YES] button again to erase the sample. If you do not want to erase it,
press the [EXIT/NO] button.
• You can erase all samples at once. Just choose the ALL option located at the bot-
tom of the scroll list in the NAME/SIZE window.
+DRIVE SETTINGS (+DRIVE UNITS ONLY)
Here you select how quick loading a new Snapshot will affect the data of the Snapshot cur-
rently stored in the Battery Backed Memory. In this menu you can also format your +Drive.
Read a brief overview of how +Drive data is handled in relation to the Battery Backed Mem-
ory in the section “+DRIVE FEATURES” on page 3.
1. Select the FILE row in the GLOBAL EDIT menu. Then select +DRIVE and press
[ENTER/YES].
QUICK MODE decides the behavior of the QUICK MODE menu. The setting is truly global
and will not be changed when changing Snapshots. The QUICK MODE menu allows you to
load Snapshots more efficiently. Access the QUICK MODE menu by holding down [FUNC-
TION] while pressing the [PATTERN/SONG] key. First the GLOBAL menu will be
accessed, but after a short while the QUICK MODE menu will appear. All locked Snapshots
are indicated by a lock symbol. A similar mode is available for Sample banks as well. See
page 79 for more information.
CHANGE will save all pattern, kit, song, mute settings and global data of the Battery
Backed Memory to the Snapshot +Drive location it was loaded from before a new Snapshot