Hangar 9 Pulse XT 60 ARF - Manual (Page 36)

36
 Step 9
Slide the cowling onto the fuselage. Use four 4-40 x
3/8-inch socket head screws and four #4 washers to
secure the cowling to the fuselage.
Note: Use threadlock on the screws to
prevent them from vibrating loose in flight.
 Step 10
Slide the spinner backplate onto the propeller shaft or
adapter for your particular motor.
 Step 11
Slide the propeller into position, aligning it with the pins
on the spinner back plate.
 Step 12
Use a #1 Phillips screwdriver and the screws
supplied with the spinner to secure the spinner cone
to the backplate.
Note: The propeller must not contact
the spinner cone. Adjust the position
of the propeller on the backplate, or
use a rotary tool and sanding drum to
remove material from the spinner cone
so the two do not contact each other.
Section 5: Electric Motor and Cowling Installation