A&D Weighing SV-100H - Manual (Page 21)

19
5 Insert the AC adapter plug into the AC adapter
jack located on the rear side of the display unit.
Insert the other end of the AC adapter plug into
an electrical outlet.
6 Press the ON:OFF key to turn the power on.
7 While in the standby mode, press and hold the MODE
key for two or more seconds. The viscometer will enter
the function mode 5vtyp .
8 Press the PRINT key to select the item.
9 Press the START or HOLD key to display atype .
10 Press the PRINT key to store the setting.
After the viscometer displays end , it displays the
next item of the function setting.
11 Press the STOP key to return to the standby mode.
Now the portable functions H-fnc, 5t-b, Hld-t, Cp, bep, Cp Hi, Cp lo are not available.
AC adapter cable
Display unit
rear side
(Standby mode)
Press and
hold
Next item of
function setting
(Standby mode)
or