A&D Weighing SV-100H - Manual (Page 97)

95
Only for SV-1A/SV-1H (When using this option, use the AX-SV-51 Stand Set)
AX-SV-55 Cup Set (2 mL)
• Sample cup set (Only for SV-1A/SV-1H)
Used when a small amount of sample (2 mL) will be
measured.
- Consists of :
Sample cup (45 mL) 5 pcs
Sample cup (2 mL) 10 pcs
Small cup holder 5 pcs
(All: Polycarbonate, Operating temperature: 120°C max.)
Lid 1 pc
(Polypropylene, Operating temperature: 80°C max.)
Used when organic solvents will be measured.
Glass sample cup (Capacity: 2 mL) 10 pc
(Pyrex ® glass, Operating temperature: 230°C max.)
Sample cup stand 1 pc
• Water Jacket
Used, in combination with a commercially available
constant temperature bath for heating medium
circulation, to maintain the sample temperature
constant or to measure the viscosity while changing
the sample temperature.
- Consists of :
Water jacket 1 pc
(Main body: Polycarbonate, Packing: Silicone rubber,
Washer: Nylon)
Sample cup
stand
Sample cup
Sample cup
holder
Sample cup
Glass sample cup
Lid
Sample cup holder
Water jacket
Circulation nozzle
Screw
Sample cup (2 mL)
or glass sample cup (2 mL)