A&D Weighing SV-100H - Manual (Page 41)

39
4 Model: SV-1A
Insert the sample cup into the sample cup holder, ant then into the water jacket indicated as 3.
When the specific gravity of the sample liquid is small and the sample cup floats, secure lightly
the front side of the cup to the water jacket using the screw provided.
Model: SV-10A/SV-100A
Insert the small sample cup into the water jacket indicated as 3.
When the specific gravity of the sample liquid is small and the small sample cup floats, secure
lightly the front side of the cup to the water jacket using the screw provided.
Use the small sample cup cover for volatile samples.
If the handles of the sample cup holder or the small sample cup interfere with the
measurement, they can be removed.
Apply force in the up and down directions slowly as shown in the illustration, to break the
handle off.
Sample cup holder Small sample cup
Screw
Glass sample cup
(Capacity: 13 mL)
Small sample cup cover
Small sample cup
(Capacity: 10 mL)
Circulation nozzle
Sample cup
(Capacity: 2 mL)
Sample cup holder
(For 2 mL)
Glass sample cup
(Capacity: 2 mL)
Water jacket