ALTANA Color-View User Manual
Page 22
Chapter 2 INSTALLATION
29
NOTE
The following considerations should always be taken into
account when performing any physical system changes such as
Installation, Reinstallation, or Configuration:
a.
Never make or break electrical connections while power is
applied. Making or breaking electrical connections, with
power applied, can generate power transients which are
harmful to internal circuit components.
b.
Never make or break serial or parallel cable connections
while power is applied to the systems. Interface circuits are
easily damaged under these conditions.
2.2
HARDWARE INSPECTION
Inspect the hardware to verify the condition of the materials received.
An external and internal inspection can be carried out as discussed in
the following sections.
2.2.1
External Inspection
An external visual inspection of the shipment is recommended prior
to opening any of the containers. The following should be checked:
• All containers received per bill of lading
•
All containers free of obvious damage
If there is any visible damage, please immediately notify the Carrier
or Shipper
.