ALTANA Color-View - Manual (Page 29)

color-view™ Spectrophotometer User’s Guide
36
5. Sample Rotator Installation (optional)
a. Turn off the color-view™ .
b. Plug the free end of the Sample Rotator Power cable into
the connector located above the RS-232 port on the rear
panel of the
color-view™ Spectrophotometer. Press the
connector in the socket firmly until it clicks.
c.
Remove the Sample Plate and Locator Plate.
d. Place the Sample Rotator on top of the color-view™ using
the 2 small pins to guide the Sample Rotator into the 2
matching holes in the top of the
color-view™.
The system integration has now been completed.